S.Y Xai

S.Y Xai BOAT INVENTORY: 

​

​

X4.6​

• X46 Standard version (A1B1C1) - 3 cabins 2 heads. Galley with white Corian worktop, fixed forward facing nav table station, large dining table and with Nordic Oak veneer throughout the yacht.

• HULL  - X-Yachts hulls are built using the latest high tech construction technologies with a vacuum-infused, post-cured EPOXY construction and  gelcoat finish.

• KEEL STRUCTURE -  Heat galvanized steel keel frame improves strength, enables central lift hoist attachment & safety

• Hull Colour - 'Pure White' (RAL 9010) & 3 x 'Light Grey' integrated GELCOAT Water Lines (RAL 7035)

​

HULL DETAILING

• Large Hull Portlights in grey tinted laminated toughened glass (6 in total)

• Bathing platform (Teak) - The platform is operated electrically, integrated attachment for “hang on” bathing ladder with teak steps.

• Teak deck is vacuum glued to the platform: If choosing Flexiteek instead of teak, remember to select Flexiteek on bathing platform.

• Hull Treatment - 3 x layers of sprayed epoxy primer & 2 x layers of White Hempel Mille NCT Antifouling.

​

DECK

• Teak on cockpit floor and seats - Vacuum applied, 9mm nominal thickness with black caulking.

• Removable cockpit table - with two hinged leaves,  resting on two stainless steel rectangular legs, with central bottle box in GRP, securely bolted with 8 bolts to cockpit floor and removable teak foot chock below the table.

• Cockpit Cushions Light Grey -  6 cm thick cushions, canvas covered, securely mounted by an alloy track and bolt rope. 

​

​

SAIL HANDLING

• Self Tacking track recessed - into the coach roof, curved 42 mm track and Toulon ball bearing traveller, single sheet led aft via the mast to cockpit winch (one side).

• Main sheet traveller track - recessed into cockpit floor, for fine tuning of mainsail sheeting point.

• Mainsheet Winches - 2 x Harken Performa 46.2 STP two-speed self-tailing mainsheet winches aft of the coaming handling mainsheet each side.

• Halyard Winches - 2 x Harken Performa 46.2 STP two-speed self-tailing

• halyard winches on coachroof each side of sliding hatch

• Electric  Winch - Mainsheet 1 x Harken Performa 46.2 STP Electric two-speed self-tailing winch.

• Electric  Winches - Halyard 1 x Harken Performa 46.2 STP Electric two-speed self-tailing winch - PORT  .

• Sail Handling Pack 1:
  1. Asymmetric spinnaker equipment including; 2 x Dyneema / Spectra sheets, 2 x gennaker sheet blocks, 2 x cleats for "parking" the sheets and 2 x Wichard shackles mounted incl. 1:1 asymmetric tack line and tack block + flip flop blocks

• 2. Outboard sheeting pad eyes mounted for self-tacker

• Flush Deck Hatches - 9 pcs: GRP hatch above anchor locker and sail compartment plus 8 frameless hatches .

• Port lights - 7 x openable coach roof port lights: 2 x openable coach roof port lights per side on outside coach roof for added ventilation in main cabin and in aft head, 1 for each aft cabin facing cockpit and 1 for each integrated in outside coaming stripe of glass, for added ventilation and light.

• Sprayhood storage - Self draining recess for optional sprayhood to be stored in the deck.

• Sprayhood Light Grey - canvas with sturdy stainless steel framework.

• Full Width Bimini for helmsman Light Grey - Canvas with stainless steel tubes and deck fittings.

• Full Width Bimini for forward cockpit Light Grey - Canvas with stainless steel tubes and deck fittings.

• Electric Anchor Windlass.

• Anchor - 25 kg brus SS anchor with 50 m x 10 mm galvanised chain
  Second Windlass Remote & chain Counter - with Quick chain counter, mounted in cockpit near starboard wheel.

• Folding Mooring Cleats - 6 x Nomen folding mooring cleats instead of standard ones incl amidship cleats .

• Painted Carbon Fibre Bow Sprit .

• Outboard Engine Bracket - Teak, mounted on aft pushpit

• ​

• MAST & RIGGING

• Fractional Triple spreader rig

• Tapered silver anodised mast

• Stainless Steel headstay chainplate

• Stainless Steel bulwark recessed chainplates for shrouds
  Permanent backstay with integral hydraulic adjuster.

• LED Steaming Light combined with LED deck flood light

• Mast Steps - 2 x Mast steps fitted to Aluminium mast

• V-Furling Boom  - 'Furler Boom T-20' infusion moulded monocoque glasfibre with carbon mandrel included.

• Spring loaded vang, boom lift/pasarella halyard, painted in grey to suit colour of standard anodised mast. 

• Mast Track for In Boom furling - Mounting of 'Furler Boom' mast track for In boom furling System by X-Yachts Denmark prior to road transport

• Furling headstay - Furlex 304 TD with an under deck drum. Furling line led back to cockpit for easy handling

• Rod rigging - discontinuous with tip cups incl. racing Rod turnbuckels for V1's and D1's

• Halyards in Dyneema SK78 - much reduced stretch less than polyester halyards

• 2 x Halyard bags - Positioned by entrance

• Code 0 Halyard  - Dyneema SK99, 10 mm, including mast block and large Spinlock halyard clutch (2:1). NOTE: To chose between extra spinnaker halyard 1:1 or Code 0 halyard 2:1.

• Standard Keel - 2.30m 'T' keel consists of antimony hardened lead T-bulb bolted and glued to cast iron fin for high strength, low centre of gravity for comfortable sailing performance. The Keel is totally encapsulated in three layers of CSM E-glass with epoxy for protection, perfecting the shape. The keel is securely bolted to the structural steel keel floor grid.

• Pedestal options for instrumentation at wheel:
  Steering wheels upgrade to black composite wheels with laminated varnished teak rim instead of standard  wheels (d=100 cm (set) 
  Large mount - 2 x Console with stainless steel grab rail for chart plotter (eS127 or Zeus2 12" - max size 370 x 350 x 165) on starboard side pedestal or 2 Multi function displays (ST70+ or H5000) on port side pedestal (2 identical size consoles). Colour matching pedestals RAL 9010
  Painted pedestals in hull colour incl medium or large mount -

• 
  INTERIOR 

• Nordic Oak veneer - all wooden surfaces.

• Teak Laminate Floorboards - Floorboards in imitated teak laminate.

• Double berth - with hinged gas strut supported top access and drawers underneath.

• Shelves next to berth and accessory shelf on headboard.

• Spring Mattress - spring mattress in Owner's Cabin upgrading standard cold foam mattress

• Long sofa - Long sofa situated in starboard side with longitudinal backrest

• U-Sofa - Large U-sofa for 6 people in portside with longitudinal backrest
  Main cabin dining table - table without table/drinks box below.

• Has top surface of wooden veneer with longitudinally grain direction

• Main cabin upper cupboards - Upper cupboards with bottom hinged doors fitted on freeboards

• Laminated Handrails - handrails in laminated oak or teak, respectively, with stainless steel spacers inside the coachroof in each side

• Backrest cushions - backrest cushions along the main bulkhead and galley front of the U-sofa

• Additional seating options for saloon:
  Double Pouf - with storage, gas spring supported seat fixed to floorboards in two positions

• Navigation Station -  with electronic equipment in a longitudinal compartment. It can fit a music radio, 9 inch plotter, VHF, heater control, etc.

• 
  GALLEY

• Coolbox - 90 litre toploaded Insulated & watercooled Danfoss / Secom compressor & Isotherm accumulator plate

• ENO 3 Burner Oven - ENO, gimballed 3 burner hob & oven

• White Corian - White Corian worktops in galley

• Fridge Front Opening - Frigoboat MS  80 litre with ice cube compartment, front opened , positioned in the galley

• Microwave - Stainless Steel front fitted in galley. Note: Runs on shore power or Generator power.

• Nespresso Citiz - mounted on sliding shelf integrated in cupboard

• 
  HEADS & SHOWER COMPARTMENT

• Tecma Electric Toilet - 12V electric, Tecma Elegance Short replacing standard manual toilet - per toilet (Saltwater flush)

• Tecma Electric Toilet - 12V electric, Tecma Elegance Short replacing standard manual toilet - per toilet (Saltwater flush)

• Aft head shower installation - Pull out shower head, table top mount, with mixer faucet

• Ocean Air Skyscreen Blinds including flyscreen and blackout blinds for small skylights;

• Forward facing coachroof portlight and hull portlights fitted with blackout blinds;

• 
  PLUMBING & HEATING

• Pressurised  hot & cold water system - with fresh water tank, 350 litres located in port side sofa in main cabin, 24 litre hotwater tank located in engine compartment.

• Deck Shower located in aft cockpit

• Seawater Deck rinse - with electric pump fitted in anchor locker

• Watermaker - Dessalator, 60 l/hr - DUO 12/230V, fitted under aft cabin berth connected to freshwater tank

• 
  ELECTRICAL INSTALLATIONS

• Shore Power Installation - 50A Battery charger & 2 x 12V Batteries.

• Separate engine start battery

• Socket package, 230V AC & 12V USB & 12V outside socket: 230V- mounted one in galley, one in each cabin and one in each head & USB Double socket - mounted in each cabin and at nav station  & 12V outside - in cockpit near helm station

• Additional Service Battery - Additional 12V service battery. (max 1 pcs). 

• Combi Battery Charger & Inverter  (230V) - 12V/2000W/70A including remote multi control panel and galvanic isolator replacing standard 50A charger

• LED Cockpit Light - White, mounted over floor in cockpit (4 Pcs)

• SuperB battery pack 270Ah
  A)     Between coach roof tops ‘vinyl panelling and coach roof side, and
  B)     Between side deck and freeboard vinyl lining. When upper

• cupboards specified, the ambient light is fitted below these.
  Red LED Courtesy Lighting - 3 x LEDs in main cabin mounted at floor level and 1 in owner's cabin

• 
  ELECTRONICS / NAVIGATION EQUIPMENT

• Flat Screen TV - 32" LED Flat Screen TV fitted on main bulkhead in main

• cabin with antenna mounted in mast incl. fitting and antenna cable, 220V socket, DVB-T and installation, mounting bracket for wall mounting.

• TV connected to Multimedia system (Note: 220V)

• 
  ENGINE & TANKS

• Fuel tank - aluminium 280 litres, centrally located below starboard aft cabin berth

• Main engine upgrade - Yanmar 80 HP CR ( 59 kW) with FOF 3 Blade folding propeller replacing Yanmar 57 HP CR engine

• Retractable Bow Thruster - Max Power Compact retractable CR70/12V bow thruster including dedicated battery bank with controls at starboard recess near steering wheel or at wheel in optional instrument box

•  

• SAILS  

• North Furling mainsail for furling boom, 3Di Ocean 700, with 5 full battens, 2 reefs, class mark,  64 m2

• North Sails Selftacking Furling Jib 88% - 3DI Ocean 700, with UV leech protection and 4 vertical battens, 41 m²

• Fire Extinguishers - 4 x 2 kg Powder fire extinguishers fitted throughout the yacht and with fire port into engine room

• Harken Winch Handles - 3 x Winch handles (10") with Lock

• Flag Pole - Teak with bronze bushing

• Mooring Lines - 2 x 20 m 14 mm polyester mooring lines

• Shore Power Cable - 1 x 20 m shore power cable

• Sirocco Gimbal Fan mounted in each cabin

• Additional gas bottle and bracket mounted in

• gas locker

• Remote for transom

• Sump pump alarm

• Additional control buttons for electrical winchs

• mounted in pedestal (4pcs in total)

• 4 x mounted in SB pedestal

• Compass, Silva 100B/H, mounted in PS
  pedestal

• Wheel Covers - 2 x Light Grey canvas wheel covers. Other canvas colours available: Dark blue and dark grey. Ask your dealer for details.

• B&G Pack II (Triton2)
  B&G Autopilot, Triton
  B&G NAIS 500B, Transceiver
  B&G VHF V90BB
  B&G VHF H50 wireless handset
  Shakespear VHF antenna for VHF & FM
  B&G Zeus 3 Plotter, 12"
  
  Export custom clearance - EU1/EX1/CO1/EUR1/A.TR/T2L documentation from Denmark.
  Launching and rigging - at X-Yachts' marina, Haderslev, Denmark, incl. full fuel tank

​